What is the cause of the failure of the aluminum curtain wall seal and how to solve it?
Jul 02, 2021
The building curtain wall is composed of metal material frame and board, and does not bear the main engineering load and role. It has the advantages of beautiful appearance, environmental protection and energy saving, and very easy to maintain. It is a contemporary multi-storey building and special-shaped project. The selection plan of the building. The key methods of contemporary metal curtain walls include curtain wall glass, dry-hanging stone exterior walls, aluminum veneer curtain walls, and composite panel building curtain walls. Only aluminum panels, fire-resistant panels, stainless steel panels, and color-coated coiled thick steel panels are used for aluminum veneer curtain walls. The aluminum curtain wall has the following characteristics:
1) The color is colorful, long-lasting, and the appearance is diversified. According to the spraying process, it can be integrated with laminated glass and dry-hanging stone on the external wall;
2) It is light in weight, which is only 1/5 of the dry-hanging stone on the exterior wall and 1/3 of the glass on the curtain wall, which greatly reduces the net weight of the exterior wall of the building;
3) Low-cost maintenance and high cost performance. Because aluminum curtain walls have so many advantages, they are generally favored by community owners. At this stage, the key to the aluminum curtain wall on the sales market in my country is to use aluminum alloy profiles, single-sided aluminum panels, aluminum-plastic composite panels, and honeycomb aluminum panels. With the large-scale application of aluminum curtain walls, more and more seals are ineffective. The damage caused by the ineffective sealing of the aluminum curtain wall is the water seepage of the building curtain wall, which is very easy to cause the destruction of the interior of the house construction vehicle, erosion of the rock wool board on the outer wall of the building curtain wall, and endanger the safety of the building. In addition, the invalid sealing will continue to increase the consumption of the construction can.
There are many reasons for the ineffective sealing of aluminum curtain walls, such as unscientific design schemes, poor selection of sealants, poor bonding, and poor actual construction operations. People often find that when the sealant is applied to the aluminum curtain wall socket, cracks occur, especially when the four seasons alternate, the temperature difference between day and night is very large, and when the temperature decreases, the sealant will be excessively stretched after the panels are folded. This is mainly because the offset work capability of the sealant cannot meet the specific application requirements. When the interior designer estimates the total width of the socket sealant, in addition to the thermal expansion and contraction of the opening plates, the following factors should also be considered, such as the offset caused by the dynamic load of the building, and the installation deviation.
When carrying out engineering construction on site, in order to ensure the excellent adhesion between the sealant and the aluminum plate, it must be ensured that the construction technology is rigorous and carried out in accordance with the standards:
1) Use the cleaning organic solvent proposed in the adhesion test report to carry out the cleaning. The aldehyde organic solvent may not be able to reasonably eliminate the air pollutants on the polyester powder spraying raw materials;
2) Use a two-step method to clean up. Use a milky white, neat, soft, moisture-absorbing and non-linting cotton cloth, first scrub with a pure cotton cloth moistened with organic solvent, and then use a second clean cotton cloth scrub;
3) All the sockets must be filled with the sealant, and it must be tightly attached to the surface of the board that must be bonded with the sealant. A problem that often occurs in aluminum curtain walls is that the sealant and aluminum are not well bonded. Because the surface treatment methods of the aluminum plate include anodizing treatment, fluorocarbon paint and electrostatic powder spraying, etc., different treatment methods and different manufacturer's process treatments will cause harm to the surface structure and characteristics of the aluminum plate, and further damage the sealant. Bonding causes harm. If the project does not carry out the relative adhesion test and compatibility test in accordance with the standards before the construction of the project, the result is that the silicone sealant is incompatible with the raw materials such as aluminum plate and sealant strip, resulting in a chemical reaction that harms the adhesion, and also harms Sealing effect.
You Might Also Like
-

PVDF Coating Aluminium Composite Panel
-

Building Materials Wall Cladding Acp Aluminum Composite P...
-

4x8 Waterproof Heat Resistant Material-Alcobond Aluminum ...
-

4mmx0.30AL PVDF Aluminium Composite Panel
-

White Aluminum Composite Panel Size 4×8 Feet Thickness 3m...
-

Cladding / Aluminum Composite Panel ACP
