Aluminum Composite Panel Buying Guide: Specifications, Prices, Installation and How to Choose a China ACP Manufacturer
Nov 20, 2026
An aluminum composite panel (ACP) purchase is defined by four variables - aluminium skin thickness and alloy, total panel thickness, coating system (70% PVDF or PE polyester) and core grade (LDPE, FR or A2) - plus the finish, sheet size and quantity. A meaningful price or pricelist can only be issued against those variables. This guide explains how to write an RFQ, audit a China ACP supplier, compare factory quotations like for like, and plan fabrication, installation and maintenance so the panels perform for their full design life.
Key Takeaways
Four variables set the price
Skin thickness, panel thickness, coating chemistry and core grade. Quotes that omit any of them cannot be compared.
3 mm vs 4 mm
3 mm suits interiors and signage; 4 mm with 0.30–0.50 mm skins is the professional facade specification.
Normalise the pricelist
Ask for a price per square metre by specification, including coating, core, packaging and any colour-matching setup.
Audit documents, not adjectives
CE / SGS / CTC papers, fire-resistant test reports and batch traceability separate a factory from a trading intermediary.
Order one batch per elevation
Batch control plus aligned installation direction prevents visible colour banding on metallic and pearl finishes.
Installation decides lifespan
Correct groove depth, sealed edges, expansion joints and annual neutral cleaning protect the warranty.
In This Guide
- What you are actually buying when you buy ACP
- The specification sheet, line by line
- How an ACP price is built
- An RFQ template that produces comparable quotes
- How to evaluate a China ACP manufacturer
- Shandong Jixiang: factory capability and credentials
- From sample card to container: the order process
- Fabrication and installation fundamentals
- Cleaning, maintenance and service life
- Product map: matching lines to applications
- Frequently asked questions
1. What You Are Actually Buying When You Buy ACP
An aluminum composite panel - also written aluminium composite panel, ACM, aluminium plastic panel, ACP sheet or alucobond-type cladding - is a factory-laminated sandwich of two aluminium cover sheets and a core. The aluminium skins usually come in AA3003 or AA1060 alloy and range from about 0.12 mm to 0.50 mm. The core is low-density polyethylene for general use, a mineral-filled FR compound for fire-retardant grades, or a predominantly inorganic A2 compound for non-combustible grades. The visible surface is a coil-applied PE polyester or 70% PVDF fluoropolymer coating, and a peelable protective film protects it through fabrication.
Standard sheet size is 1220 × 2440 mm (4 × 8 ft), with 1250 mm and 1500 mm widths and custom lengths available. 3 mm and 4 mm are the volume thicknesses. A 4 mm panel with 0.40 mm skins weighs roughly 7–8 kg/m², which is why ACP can be installed with lighter subframes and handled without heavy lifting plant - a major cost advantage over solid aluminium veneer or natural stone. That light weight, flatness and easy routing explain why ACP is used for exterior wall cladding and curtain walls, interior walls and ceilings, column casings, canopies, signage, advertising boards and UV digital printing.
Buyers often make one expensive mistake at this point: they buy by product name. "4 mm PVDF ACP" describes almost nothing about skin thickness, alloy, core grade or resin content. Two quotes for that phrase can differ by 30% and both be honest. The fix is a specification sheet, which is the subject of the next section.
Shandong Jixiang Decoration and Building Material Co., Ltd. - ACP manufacturing base in Fei County, Linyi, Shandong, China.
2. The Specification Sheet, Line by Line
| Parameter | Common range | Why it matters to a buyer |
|---|---|---|
| Total panel thickness | 3 mm, 4 mm; 2–6 mm custom | 4 mm resists wind deflection and oil-canning on facades |
| Aluminium skin | 0.12–0.21 mm interior; 0.30–0.50 mm exterior | Drives stiffness, impact resistance and most of the material cost |
| Alloy and temper | AA3003 H14 or AA1060 | 3003 offers higher proof strength for structural cassette spans |
| Core | LDPE / FR (B1) / A2 | Sets the fire classification and the permitted building height |
| Coating | PE polyester or 70% PVDF (Kynar 500 / Hylar 5000) | Sets colour retention: 3–7 years outdoors for PE, 15–20+ for PVDF |
| Dry film thickness | ≥25 μm two-coat; ≥35 μm three-coat PVDF | Under-thickness topcoats halve effective weathering life |
| Standard sheet | 1220 × 2440 mm; 1250 / 1500 mm widths; custom lengths | Plan cassette sizes around sheet size to cut waste |
| Peel strength | Climbing-drum peel above 100 N·mm/mm typical baseline | Predicts delamination resistance at routed folds and over time |
| Flatness | ≤1 mm/m; ≤0.5 mm/m for polished / raking-light surfaces | Prevents visible waviness on mirror and high-gloss finishes |
| Fire and coating standards | EN 13501-1, ASTM E84, NFPA 285, GB 8624, AAMA 2605, GB/T 17748 | Each answers a different compliance question |
Table 1 - A defensible ACP specification sheet. Ask the supplier to confirm each line in writing before comparing prices.
For exterior work, add a 15–20 year written colour-and-gloss warranty, a named coating resin supplier, a weathering test report to AAMA 2605 or Qualicoat Class 2, and an assembly test such as NFPA 285 where the building height requires it. For interior and signage work, PE coating with a documented colour range and UV printability is usually sufficient. In both cases, require the report for the exact configuration - skin, core, coating and colour family - rather than a generic category certificate.
3. How an ACP Price Is Built
Aluminium coil is the largest cost component, so ACP prices track the metal market. The second layer is skin thickness: moving from 0.21 mm to 0.40 mm skins roughly doubles the aluminium in the panel. The third is coating: 70% PVDF resin, three-coat metallic systems, pearl pigments and custom colour matching all add cost. The fourth is the core: FR mineral-filled cores cost more than LDPE, and A2 cores more than FR. Finally, order volume, custom widths, small batches, protective packaging for long sea freight and third-party testing all appear in the quotation.
This is why a factory pricelist should be structured by specification, not by a single "price per sheet". A buyer comparing a 3 mm PE 0.12 mm signage panel with a 4 mm PVDF 0.40 mm FR facade panel is comparing two different products. Ask for a price per square metre, state the Incoterm and destination port, and include sample cost, tooling for custom colours, packaging and estimated container loading so the landed cost can be calculated. Factory-direct buying from a China ACP manufacturer typically removes one trading margin and, more importantly, puts the technical question and the production line in the same organisation.
4. An RFQ Template That Produces Comparable Quotes
Copy these eleven fields into your enquiry and every serious ACP supplier will be able to quote on the same basis: (1) product name and intended application; (2) interior or exterior exposure and design life; (3) building height and required fire classification; (4) core grade - LDPE, FR / B1 or A2; (5) coating system - PE or 70% PVDF, with the performance standard; (6) finish and colour reference - RAL, Pantone, pearl, metallic, wood, granite, brushed or mirror; (7) total thickness and aluminium skin thickness; (8) sheet size and any custom widths; (9) quantity in square metres and number of elevations; (10) required documents - CE, SGS, CTC, fire test reports, warranty, sample cards; (11) destination port, Incoterm and target delivery window.
Add two quality clauses that experienced buyers always include. First, one production batch per elevation with the batch number printed on the packing list. Second, sample approval before mass production, with the approved sample retained as the reference for colour, gloss and grain direction. Ask also whether the manufacturer can supply spare panels from the same batch for future repairs - a small quantity that saves a very visible mismatch five years later. If the project mixes facade, interior and signage packages, say so in the RFQ; consolidating them in one container usually lowers freight per square metre.
5. How to Evaluate a China ACP Manufacturer
Six questions separate a factory from a trading intermediary. Does the company own continuous hot-laminating lines and coating or fluorocarbon spraying lines, and can it show them? What is its annual capacity and typical lead time for a container order? Can it issue test reports and a Declaration of Performance for the exact configuration being purchased? Does it run in-house QC for peel strength, coating thickness, flatness and colour, with batch traceability back to the aluminium coil lot? Can it support OEM branding, custom colour and custom size requests? Which markets does it currently export to, and can it provide packing and loading photos for a comparable order?
Then verify the paperwork. CE, SGS and CTC documents and fire-resistant test reports should name the product and the tested configuration. Weathering claims should reference AAMA 2605, Qualicoat or EN 13523 for the coating system. Fire claims should reference EN 13501-1, GB 8624, ASTM E84 or a full-scale assembly test such as NFPA 285 - and the buyer must remember that E84 Class A is a material test, not a high-rise facade approval. A factory that answers these questions with documents, photographs and a sample card is one you can audit; a supplier that answers with superlatives is not.
Continuous laminating and coating capability keeps colour matching, batch records and QC under one roof.
6. Shandong Jixiang: Factory Capability and Credentials
Shandong Jixiang Decoration and Building Material Co., Ltd. is a professional China aluminum composite panel manufacturer, supplier and factory founded in September 2003 and located in Tanyi Industrial Zone, Fei County, Linyi City, Shandong Province, China. The company covers more than 120 acres, has registered capital of RMB 31.88 million and employs roughly 300 staff. Its team has more than 20 years of professional experience in building materials and works with architectural institutions and construction companies on noise reduction, waterproofing, fireproofing and decorative products.
Production is built around fully automatic continuous hot-laminating lines with matching testing equipment, two automatic fluorocarbon spraying lines and more than 70 sets of sheet-metal equipment, giving an annual output of about 6 million m² of decorative materials. The company holds CE, SGS and CTC documentation and fire-resistant test reports, exports to Europe, South America, the Middle East and Africa, and accepts special requests for customisation and OEM work. Its core range covers fifteen ACP product lines from PE and PVDF colours through brushed, mirror and fireproof grades, plus advertising ACP, aluminium ceiling and aluminium panel systems.
2003
Founded, Shandong, China
6M m²
Annual decorative material capacity
300
Staff across production and sales
70+
Sets of sheet-metal equipment
7. From Sample Card to Container
A typical factory-direct order runs through eight steps. (1) Send the RFQ with the eleven fields above. (2) Receive a specification-matched quotation and pricelist. (3) Request sample cards for the shortlisted finishes and approve them under natural daylight. (4) Confirm the proforma invoice, Incoterm, payment terms and lead time. (5) Approve the production sample and colour standard, and freeze the shop drawings including cassette layout and grain direction. (6) Mass production with in-line QC and a batch number assigned. (7) Pre-shipment inspection of colour, coating thickness, peel strength, flatness, edge quality and packaging. (8) Container loading with the protective film intact, plus the document pack - test reports, packing list, batch traceability and warranty.
For buyers who want to see the process before committing, the video centre and the about-us page show the production lines, equipment, certificates, team and exhibition activity. That visibility is worth more than a low headline price: it tells you whether the factory can repeat the approved sample at container scale.
8. Fabrication and Installation Fundamentals
ACP is popular with fabricators because it can be cut, routed, folded and fixed with standard workshop equipment. For cassette fabrication, CNC V-groove routing removes the inner skin and most of the core along the fold line while leaving roughly 0.3 mm of core and the outer aluminium skin intact; corners are punched, edges folded to 90°, corner angles riveted, and perimeter extrusions fixed with stainless rivets. Routing too deep weakens the outer skin; too shallow stresses the core and causes bowing or delamination. Cold roll bending without grooving is used for smooth curves, respecting a minimum radius of roughly 10–15 times panel thickness for PE-core grades.
On the wall, choose between wet-seal systems (backer rod and architectural silicone, with more maintenance and potential dirt streaking) and dry-seal rainscreen systems (EPDM gaskets and interlocking extrusions that drain water). Provide 5–8 mm expansion joints, slotted holes or sliding fixings so thermal movement does not bow panels or stress fasteners. Seal the cut edges of mineral-core panels against moisture ingress, keep the protective film on through fabrication, and remove it within about 45 days of installation. Never re-bend a folded edge, and store sheets flat in a dry, ventilated place away from direct sun and temperatures above 70 °C.
9. Cleaning, Maintenance and Service Life
A well-specified facade should be cleaned and inspected at least once a year. Use water and a neutral detergent, soft cloths or sponges, and rinse thoroughly; test any cleaner on a spare sample first to check compatibility with the coating. Avoid abrasive pads, strong solvents, acidic or alkaline cleaners and high-pressure jets directed at joints. Inspect sealant joints, fixings, cavity barriers and panel edges at the same time, and repair damaged coating promptly to prevent underfilm corrosion. Brushed, mirror and high-gloss surfaces need the gentlest regime of all.
Service life is the sum of three decisions: the right coating for the exposure, the right core for the building, and the right installation for the movement. A PE panel used indoors will look new for years; the same panel on a south-facing facade will chalk within a handful of seasons. A 70% PVDF panel on a 4 mm FR core, installed with proper joints and annual cleaning, is the specification that supports a 15–20 year appearance warranty. Buyers should treat the maintenance plan as part of the purchase, not as an afterthought.
10. Product Map: Matching Lines to Applications
Exterior facades and curtain walls: Solid PVDF, Metallic PVDF, Pearl PVDF, Wooden PVDF and Granite PVDF. Interiors and signage: Solid PE, Glossy PE, Metallic PE, Wooden PE, Granite PE and Pearl Color Aluminum Plastic Panel.
Speciality and compliance: Brushed ACP, Mirror ACP Wall Cladding and Fireproof ACP. Related packages: Advertising ACP, Aluminum Ceiling and Aluminum Panel. See the complete Aluminum Composite Panel category or the full product list for custom colours and OEM requests.
4 × 8 ft (1220 × 2440 mm) 3 mm PE ACP sheet - the volume format for signage and interiors.
PVDF coated ACM sheet for interior and exterior wall cladding projects.
11. Frequently Asked Questions
What does aluminum composite panel cost per square metre?
There is no single price: it depends on aluminium coil cost, skin thickness, coating system, core grade, finish and order volume. A 3 mm PE signage panel is far cheaper than a 4 mm PVDF FR-core facade panel. Ask a China ACP factory for a pricelist structured by specification, stated per square metre with the Incoterm and packaging included.
Should I buy 3 mm or 4 mm ACP?
Use 3 mm for interiors, ceilings, partitions and signage where panels are well supported. Use 4 mm with 0.30–0.50 mm aluminium skins for exterior facades and curtain walls, where wind load, flatness and oil-canning resistance matter. Confirm the requirement with the project's facade engineer.
How do I know a supplier is a real factory rather than a trader?
Ask for production line photos or video, annual capacity, in-house QC records, batch traceability, test reports naming the exact product, and evidence of exports. Jixiang operates its own laminating and fluorocarbon spraying lines in Linyi, Shandong, with about 6 million m² annual capacity and CE, SGS and CTC documentation.
Can I get custom colours, OEM branding and free samples?
Yes. RAL, Pantone and physical-sample colour matching, OEM packaging, custom widths and lengths, and special thicknesses are accepted. Sample cards are provided for approval before mass production; custom colours require a signed reference sample so the whole order is produced to one standard.
What is a typical MOQ and lead time for wholesale ACP?
It varies with finish and customisation; standard colours and sizes are fastest, while custom-matched three-coat metallic or pearl finishes need a colour-development step. Send the specification and quantity in the RFQ and the factory will confirm the MOQ, production schedule and container loading plan together with the quotation.
Which certificates should I request for an exterior facade order?
Request the coating weathering report (AAMA 2605 / Qualicoat), the reaction-to-fire classification for the exact core (EN 13501-1 or GB 8624), any required assembly test such as NFPA 285, third-party SGS / CTC reports, CE documentation where applicable, a written warranty and the production batch record.
12. Start a Factory-Direct Enquiry
Shandong Jixiang Decoration and Building Material Co., Ltd. supplies aluminum composite panels, advertising ACP, aluminium ceilings and aluminium panels to distributors, facade contractors and signage buyers in Europe, South America, the Middle East and Africa. Send your specification, quantity and destination port to vip001@alu-fame.com or +86 157 3731 7522 for a quotation, pricelist and sample card set. Address: Tanyi Industrial Zone, Fei County, Linyi City, Shandong Province, China.
Before you buy, see who makes your panels.
Tour the factory, equipment and certificates, or watch production and loading in the video centre.






