Different Coating Advertising ACP

Advantages of Advertising Aluminum Plastic Panels With Different Coatings

Testing process for aluminum-plastic advertising panels with different coatings

Impact resistance test
Impact resistance reflects the impact resistance of the coating and its ability to impact and deform the aluminum plate and core material. The inspection process of advertising aluminum-plastic panels with different coatings should not peel or crack under the energy impact of 50kg·cm.

Acid and alkali resistance test
This test is a test of the corrosion resistance of the coating. Our company uses capping and impregnation. National standard fluorocarbon and polyester coatings are used respectively: polyester coating is soaked in 2% hydrochloric acid, calcium hydroxide and standard cement with water for 24 hours; fluorocarbon coating is soaked in 5% hydrochloric acid and sodium hydroxide solution for 24 hours; the coating should be kept stable Change.

Abrasive testing
Wear resistance mainly reflects the wear resistance of the coating. National standards stipulate the standard amount of sand used for grinding unit thickness coatings using the falling sand method. The rubber grinding wheel method is used internationally to express the weight loss of the coating after a certain number of grindings.

High temperature and low temperature testing
This is a set of high and low temperature test combinations. The inspection process of advertising aluminum-plastic panels with different coatings is after factory sampling, after a high temperature of 80°C for 2 hours and a low temperature of -40°C for 2 hours. The number of cycles is 20-50 times, and it is confirmed that there are no cracks or changes. Afterwards, the samples were tested for adhesion.

Normal weather test
This test mainly tests the durability performance of the product under natural environmental conditions. We also conducted a natural exposure test on the roof of the factory.

Material PCS testing
Calorific value is an important indicator of A2 non combustible metal composite core material. The material calorific value tester is specially used to detect the calorific value of various core materials to ensure that the flame retardant performance of the product meets national standards.

Classification Application of Different Coating Advertising ACP

1

Fireproof board

 

Use flame retardant core materials. When the product encounters high temperatures, it will form a fire prevention system, which can effectively block the spread of fire sources in high temperature environments.

2

Antibacterial and anti mildew coating advertising aluminum plastic panels

Advertising aluminum plastic panels with different coatings use unique raw materials, which are 90% effective in sterilizing and preventing mold. Especially in rainy weather such as in the south, it can effectively prevent the reproduction of mold.

3

Anti static different coated advertising aluminum plastic panels

Anti-static aluminum-plastic panels coated with anti-static paint have a surface resistance lower than 109Ω, which is lower than the surface resistance of ordinary plastic panels. Therefore, static electricity is not easily generated. And dust in the air is not easy to adhere to its surface.

4

Decorative coated aluminum composite panel

Various decorative coatings are applied to the surface of advertising aluminum-plastic panels with different coatings. Commonly used fluorocarbon paints include metallic paint, conventional paint, and pearlescent paint. Their main functions are. This is the most common variety on the market. Fluorescent colors and other colors have an impact on decoration. It is the most common variety on the market.

Some Common Types Of Coatings Used In Advertising Acp Include

PVDF Coating

This is a high-grade coating that provides excellent weather resistance and durability. It is commonly used in outdoor advertising ACP to protect the panel from UV radiation, corrosion, and other environmental elements.

Polyester Coating

This coating is cost-effective and provides good chemical and moisture resistance. It is commonly used in indoor advertising ACP to enhance the panel's aesthetic appeal.

Ano Coating

This is a special type of coating that provides self-cleaning properties to the surface of the ACP. It repels dust, dirt, and other pollutants, making the panel easy to maintain and clean.

Anti-Scratch Coating

This coating is used to provide scratch resistance to the surface of the ACP. It is commonly used in high-traffic areas where the panel is likely to get scratched or damaged.

1) Fireproof and water resistant, excellent heat and sound insulation.
2) Excellent surface flatness and smoothness.
3) Superior weather, corrosion and pollutant resistance.
4) Even coating, various colors.
5) Super peeling strength.
6) Superior impact resistance.
7) Lightweight and easy to process.
8) Easy to maintain.

Applications of Different Coating Advertising ACP

1) Building exterior curtain walls.
2) Decoration and renovation additions for old buildings.
3) Decoration of interior walls, ceilings, bathrooms, kitchens and balconies.
4) Shop door decoration.
5) Advertisement board display platforms and signboards.
6) Wallboards and ceilings for tunnels.
7) Industrial materials and materials for vehicles and boats.

The Using Steps of Different Coating Advertising ACP

Preparing the surface

Before applying any coating to the advertising ACP (Aluminum Composite Panel), it is important to prepare the surface. This involves cleaning the surface thoroughly to remove any dirt, dust, or debris. The surface must also be dried completely to ensure that no moisture is present.

Primer Application

After preparing the surface, a primer should be applied. The use of a primer helps to improve adhesion, as well as provide a better surface for the coating to adhere to.

Applying the coating

The type of coating being used will determine the next step in the process. Different coatings may have varying application methods, such as spraying, brushing, or rolling. It is important to follow the manufacturer’s recommendations for application.

Drying/curing time

After applying the coating, it is important to allow it to dry and/or cure fully before handling or moving the advertising ACP. The drying/curing time will vary depending on the type of coating being used.

Finishing

Once the coating has fully cured, a finishing touch can be applied if desired. This can include a topcoat or additional decorative elements.

Inspection

Finally, the advertising ACP should be inspected to ensure that the coating has been applied correctly and evenly. Any areas that require touch-up should be addressed before the panel is put into use.