How to use the adhesive of aluminum-plastic board
Jul 09, 2020
(1) The surface of the aluminum-plastic board after applying the adhesive is very easy to absorb dust in the air, so the site should be kept clean and try to avoid dust and dirt sticking to the surface layer. Operators should wear protective gloves and work clothes during construction.
(2) In order to prevent the adhesive from absorbing moisture and reducing the bonding strength, the indoor relative humidity can be appropriately controlled.
(3) Since there are volatile solvents in the adhesive, do not touch open flames or high temperatures, and the construction area should maintain air circulation. The temperature is too high, the container is not well sealed or the exposure time is too long, the solvent is volatile, resulting in too high viscosity to be applied.
(4) The adhesive should be stored in a sealed container and placed in a warehouse with cool air and free of direct sunlight. The effective storage period is one year.
(5) After the wall is cured, remove the protective film on the surface of the aluminum-plastic board, install a special aluminum alloy bead at a distance of 600mm on the wall, and fasten with self-tapping screws.






