How To Clean And Maintain The Aluminum-plastic Panel Curtain Wall Project
Jun 14, 2020
Aluminum-plastic board cleaning
The surface of the aluminum-plastic panel curtain wall should be cleaned and maintained regularly and professionally. This cleaning is not only to keep the outer wall of the aluminum-plastic composite panel clean and beautiful, but to remove the ink or baking paint that is regularly cured on the surface and remove the invading dirt to ensure the long-term weather resistance and beautiful appearance.
The external wall cleaning of aluminum-plastic board should be done manually, or appropriate cleaning equipment should be carried out from top to bottom. Do not use any corrosive objects to scrub the painted surface.
The specific cleaning steps are as follows:
(1) First rinse the surface of the board with plenty of water
(2) Use a soft cloth soaked with detergent diluted in water to gently wipe the board surface
(3) Rinse the board surface with a large amount of fresh water to wash away the dirt
(4) Check the surface of the board, and focus on cleaning the places that are not cleaned with detergent
(5) Clean the board surface with clean water until the detergent is completely washed away
Precautions: Do not clean the hot board surface (when the temperature exceeds 40) when cleaning the aluminum-plastic board, because the excessive evaporation of water is harmful to the paint on the board surface. It is particularly important to note that appropriate detergents should be selected. A basic principle is to select a selective detergent. Do not use strong alkaline detergents (such as sodium hydroxide, potassium hydroxide, or sodium carbonate), strong acid detergents, corrosive detergents, and paint-soluble detergents. In addition, before cleaning a large area, it is best to choose a small piece of board for testing.
How to clean and maintain the aluminum-plastic panel curtain wall project
Maintenance of aluminum-plastic board
(1) Before the construction of the aluminum-plastic board is completed, the protective film of the aluminum-plastic board on the surface shall not be torn off to avoid scratching the surface during the operation.
(2) The surface of the mirror aluminum plastic plate is bright and smooth, and the dust is not easy to adhere. Wipe it 2-3 times a month. Do not use nylon brushes, loofah cloths, volatile solvents or hydrochloric acid cleaners when wiping. Otherwise it will damage the mirror surface. It is best to use a soft cloth to clean the glass with a neutral detergent or a stain-removing oil produced by China National Petroleum Corporation.
(3) If the aluminum-plastic board is used in places with heavy outdoor humidity and easy to produce fog condensation, soft cloth should be used to gently wipe off the fog to maintain the lasting and beautiful effect.
