Home / Products / Aluminum Composite Panel / Solid Color PE Aluminum Composite Panel / Content

Products

Aluminum Composite Panels Exterior Walls Of The Building

Aluminum Composite Panels Exterior Walls Of The Building

Aluminum Composite Panel with Polyethylene Core (PE) - PE Core panels offer the rigidity of heavy gauge sheet metal in a light weight, durable, easy to maintain product that offers superior flatness. Aluminum Composite Panel with Fire Retardant Core (FR) - Perfect for cladding applications where non-combustible materials are required, the FR Core panels offer the same attributes as the PE Core panels with the added benefit of being fire code IBC compliant.

Send Inquiry Chat Now

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Product Name:Aluminum Composite Panels Exterior Walls Of The Building

Product information
Panel Thickness	1.5mm-8mm
Aluminum skin Thickness(mm)	0.08mm-0.5mm
Width(mm)	1000mm,1220mm,1250mm,1500mm,2000mm(max)
Length(mm)	1000mm-5800mm
weight	5.5kg/sqm based on 4mm Thickness
Surface Coating	PE,PVDF,PET FILM,NANO,Mirror,Brush,Wooden,Marble
size	12202440mm,12502500mm,12202800mm,12503200mm Or as clients requirement
standard	According to GB/T 17748-1999 standard
More Services	OEM,free Sample,Color Matching

Description

The Solution Aluminum composite panel consist of two aluminum sheets and a fire resistant polyethylene core. Its advantage are lightness, stiffness and durability. It is ideal for direct digital printing. A special polyester coating guarantees the best ink adhesion and enables the reproduction of very fine lines and structures.

Precautions for the use of aluminum composite panels

(1) The aluminum-plastic composite panel should be stored or installed in a dry and ventilated place in an appropriate manner to avoid water accumulation and the ambient temperature is not higher than 70 °C.

Avoid installation in unusual environments such as smoke, wind, sand, radiation, hazardous gases and chemical environments.

(2) Aluminium-plastic composite panels shall be laid flat during transportation or storage. The side of the board 4 must be lifted at the same time during transportation. Do not drag it on one side to avoid scratching the board surface.

(3) When using a slotting machine or a machine to slot, use a round head or ≥90. The V-shaped flat saw blade or milling cutter is slotted, leaving a 0.2-0.3mm thick plastic core plate with the panel to be crimped to increase strength and toughness and prevent hydrogenation of the aluminum sheet. If the corner is too fast or the cut is damaged and the aluminum panel or the plastic left is too thick, the aluminum plate will break or the paint film will burst when the flange is bent.

(4) When the flange is bent, it needs to be evenly applied. Once formed, do not bend it repeatedly, otherwise the aluminum panel will break.

(5) In order to maintain the flatness of the aluminum-plastic panel and enhance its wind-resistance, the aluminum-plastic panel needs to be lined with the skeleton after crimping and glued to the board.

(6) When used for curved surface decoration, bend the aluminum-plastic composite board with bending equipment, and use the force slowly to make the board gradually reach the required surface, not in one step. The bend radius should be greater than 30 cm.

(7) Install the aluminum composite panel on the same plane in the same flow direction. Failure to do so may result in poor visual role.

(8) After the aluminum composite panel is installed, the protective film should be removed within 45 days. Otherwise, the protective film will age due to long-term exposure to sunlight. When peeling the film, it may cause glue.

(9) The interior wall panel should be used indoors and should not be installed outdoors to ensure its service life.

(10) If there is any pollution on the surface of the board during construction or use, it can be gently cleaned with neutral detergent or alcohol. Avoid cleaning with strong acid and strong alkaline detergent.